swaploader SL-520X - Page 42

SectionII:Installation‐Accessories

2.9.INS.ACC.10H90
4. Once the mount brackets are
located on the container, weld the
roller mount brackets in place (see
Fig. A).
5. Install the roller (Pt. No. 10H12)
between the brackets with the roller
axle (Pt. No. 10H31) and the
fasteners provided (see Fig. C).
Grease the rollers before use.
10H91
10H90
FigureB
Figure
C
MATERIAL LIST FOR 10H90 AND 10H91
ITEM PART # QTY DESCRIPTION WT-lb/ea.
1 32H03 4 Roller Ear 11.95
2 10H12 2 Roller Wdmt. 39.76
3 10H31 2 Roller Axle Wdmt. 7.28
4 00P62 2 3/8-16 UNC x 1 Bolt .05
5 90P03 2 1/8 NPT Grease Zerk .01
6 00755 2 3/8 Dia. Lock Washer .01
7 00P36 2 3/8 Dia. Washer H.T. .10
2-30