SWF K Series


⑦ Mirror Convert : This function is to set the design to look like the one reflected on the mirror.
When entering the values as below, the following settings will be made.
(20mm)
Move
Volume
Starting Point
󱈦
󱈎
(20mm)
Move
Volume
NO X
YX Y
(30mm)
Move Volume
(30mm)
Move Volume
(30mm)
Move Volume
Starting Point
󱈦󱈦
󱈎
Starting Point
󱈎
Starting Point
󱈎
Value Setting
0NO
1X
2Y
3 X_Y