J
Joshua HicksSep 18, 2025
How to solve error in design memory system of SWF K Series?
- KKelly BurchSep 18, 2025
To resolve the error in design memory system, press Reset or turn off and on the main switch.
To Next PageTo Next PageTo Previous PageTo Previous Page
How to solve error in design memory system of SWF K Series?
To resolve the error in design memory system, press Reset or turn off and on the main switch.
What to do if 100 memory rooms are full on SWF K Series Sewing Machine?
If the 100 memory rooms are full with saved designs, you should delete unnecessary data.
What to do if there are no sectors on the diskette of SWF K Series Sewing Machine?
If a floppy diskette is not formatted or the format is different, format the diskette or replace it with another one.
What causes AC Line error on SWF K Series and how to fix it?
If a problem occurs on the joint board, replace the joint board.
What to do if stop switch error appears on SWF K Series?
Check whether the stop button contacts the connector.
What to do if start switch error appears on SWF K Series?
Check whether the start button contacts the connector.
What to do if the diskette is damaged on SWF Sewing Machine?
If the diskette is damaged, format a diskette or replace it.
What to do if bad sector error during floppy reading appears on SWF Sewing Machine?
If you encounter a bad sector error during floppy reading, format the diskette or replace it.
How to troubleshoot Y-axis driver error on SWF K Series?
To solve the Y-axis driver error, turn off and on the main switch.
What to do if diskette removed from FDD of SWF Sewing Machine?
If the diskette was removed from FDD, insert the diskette and start are work again.
General| Brand | SWF |
|---|---|
| Series | K Series |
| Category | Sewing Machine |
| Thread Trimming | Automatic |
| Stitch Speed | 1200 SPM |
| Maximum Speed | 1200 SPM |
| Supported File Formats | DST |
| Power Requirements | 50/60Hz |
| Dimensions | Varies by model |
| Weight | Varies by model |
Covers installation, backup, memory management, and system settings.
Guides on adjusting machine settings and basic specifications.
Covers setting various machine specifications like head, color, trim.
Provides a hierarchical overview of the function menus.
Explains how to load embroidery designs from memory.
Details importing designs from external devices.
Overview of various setting options for embroidery.
Covers fundamental settings like scale, angle, and mirror.
Details parameters related to the embroidery process.
Explains parameters related to the machine's operation.
Covers changing needle bars and colors for designs.
Details setting the frame's start, middle, and end positions.
Configures options like cording, sequin, and boring.
Checks machine readiness for embroidery work.
Repeats single or multiple designs within one frame.
Repeats one design along X and Y axes.
Synthesizes multiple designs to create new designs.
Allows editing of embroidery designs.
Changes codes and stitch counts based on design data.
Saves two different designs from a chosen part of a design.
Combines short stitches to prevent thread breakage.
Accesses machine maintenance functions.
Displays saved error messages and their details.
Lists error messages and their corresponding handling procedures.
