SWF SB Series


󱀲 Press on the upper side of the screen in <Fig. 5.6.2-9>.
As in <Fig. 5.6.2-10>, the screen asking for the saving method will appear.
PREVIOUS
F8
[Fig. 5.6.2-10]
󱀳 Press .
As in <Fig. 5.6.2-11>, Room1 is occupied by the general repeat design which was created in [Exercise 5.7.1-1].
DATA
F1
󱀴 In <Fig. 5.6.2-11>, select Room 2 and press .
As in <Fig. 5.6.2-2>, the special repeat setting screen appears.
SELECT
F7
[Fig. 5.6.2-11]