SWF SB Series User Manual

55--1177
You can move to the embroidery design folder by pressing , as in <Fig. 5.3.2-1>.
When pressing , as in <Fig. 5.3.2-2>, the design files contained in the chosen folder are displayed.
To move to the upper-level folder, press the “”folder on the left-hand side.
DIR/FILE
F3
F2
F1
[Fig. 5.3.2-2]
5.3.2 USB Input
This function is to enter embroidery designs saved in the USB memory to the OP Box.
Insert the USB memory containing embroidery design files into the USB port.
When “USB”is selected in <Fig. 5.3.0-1>, <Fig. 5.3.2-1> appears.
[ Caution ]
The file system of the USB memory shall be FAT16, not FAT32.
[Fig. 5.3.2-1]

SWF SB Series Specifications

General

Brand	SWF
Model	SB Series
Category	Sewing Machine
Language	English