SycoTec easyDive 4425 - Motor Codes Via Inputs IN2

EN
16
4.5 Motor Codes Via Inputs IN2...IN6 to X5:
In order to use IN2...IN6 for the motor codes, code P102 motor coding must be assigned to the number of
the motor to be used (1 - 32). Additionally, the required inputs are to be set to motor code with
parameters P111–input IN2 up to P115–input IN6
Bit4 Bit3 Bit2 Bit1 Bit0 Code Value Assigned Motor Parameter
IN2 IN6 IN5 IN4 IN3 in P20 Memory
L L L L L 1 M1
L L L L H 2 M2
L L L H L 3 M3
L L L H H 4 M4
L L H L L 5 M5
L L H L H 6 M6
L L H H L 7 M7
L L H H H 8 M8
L H L L L 9 M9
L H L L H 10 M10
L H L H L 11 M11
L H L H H 12 M12
L H H L L 13 M13
L H H L H 14 M14
L H H H L 15 M15
L H H H H 16 M16
H L L L L 17 M17
H L L L H 18 M18
H L L H L 19 M19
H L L H H 20 M20
H L H L L 21 M21
H L H L H 22 M22
H L H H L 23 M23
H L H H H 24 M24
H H L L L 25 M25
H H L L H 26 M26
H H L H L 27 M27
H H L H H 28 M28
H H H L L 29 M29
H H H L H 30 M30
H H H H L 31 M31
H H H H H 32 M32
L = low voltage 0..5 V (contact open), H = high voltage, 24 V (contact closed)