EN
36
8.1 Specific Programs
Under special functions, it is possible to establish the default state and to select various utility and test
programs which serve as troubleshooting programs and repair aids for the customer and the after sales
service (ASS).
8.2 Actuator / Sensor Test
This test serves to check the function of the remote control and the internal signal.
Switch the frequency inverter to mode “no motor“. Click to delete the warning.
Sensors of temperature radiator box and input voltage UR provide additional information on the condition
of the frequency inverter.
After calling-up this window “no motor” is configured!
To Next Page
Loading...
