TV OPERATION
i,,,i,
1 Turn on the TViVCR
Press the POWER button to turn on the TV/VCR.
2 Select the channel number
Press the CHANNEL • or • button to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed must be selected
on the cable box or satellite box.
i, . m
3 Adjust sound ("
L
Pressthe VOLUME _ or V button
to adjustthe volume.
VOLUME k_3
Illll=i=ii==
This function enables you to decrease the TV screen
contrast and making it suitable for use with a TV
GAME.
NOTE: This function can not be set during recording.
Press the GAME button on the
remote control. "GAME" appears
on the screen.
When you press the GAME button;
• The TV/VCR comes on automatically if it is off.
• The TV/VCR will be in external input mode auto-
matically.
TO (.AA(.EL THE (,AME MODL
Press the GAME button or CHANNEL • or • but-
ton on the remote control.
The TV/VCR's picture controls - BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS - are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
• TV/VCR power must be turned on.
1 Select "PICTURE CONTROL"
Press the MENU button on the _E"O-
TIMER _ _A_'O_,_G
remote control. ,. P,_URE_,_
SEI_ING CL_K
CHANNEL _4ETUp
Press the PLAY/• or STOP/• but- _ .......
'ACMIP $EI Up
t_,_GIg_,GE [Et4Gt.ISH]
ton to point to "PICTURE CON- z_o_*'_._o_t°_
T_ 8EAO,C_
TROL". ...........
Then, press the F.FWD/I_" button.
2 Select item you want to adjust
Press the PLAY/• or STOP/• but-
ton until desired control is dis-
played.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
BRtGHT
tat30 Ot2_QIOOO QQC3C3,
3 Adjust the picture control
Press the F.FWD_ or REW/_I button to adjust to
/our desired level.
REW/_I F.FWD/I_
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
= If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 17- EN
9J27
To Next Page
Loading...
