SPECIAL PLAYBACK
Make sure ...
• TV/VCR power must be turned on.
• Insert a prerecorded tape.
• Before playback, follow steps below.
This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1 Seleet "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/v but-
ton to point to "USER'S SET UP".
Then, press the EFWD/I_- button.
-MENU-
TIMER PROGRAMMING
PICTURE CCINTROL
SET_IN_ CLCCK
CHANNEL SET UP
_- USER 5 SET Up
V_3Htp SET UP
tANGUAGE IENGLISH I
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
2 Set "RENTAL" to [ON]
Press the PLAY/& or STOP/V but-
ton to point to "RENTAL".
Press the EFWD/I_ or REW/<I
button until [ON] appears.
....:'sELl
l AUTO RETUAN [tJFFI
m
3 Exit the Rental setting
Press the MENU button on the remote control to
retum to the TV mode.
4 Start playback
Press the PLAY button to start playback. "RENTAL
PLAY I_" appears.
• Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
7D CANCEL TIlE RENT>tL MOI)E
Repeat steps [1] and [2], select [OFF] using the
EFWD,'I_ or REW/<I button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT: Repeat playback from the beginning
to the end of the tape.
BLANK REPEAT: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
1 Select "USER'S SET UP"
-MENU
Press the MENU button on the _,ME,_,_.,.,,,_
_CTURE CONTROL
remote control. _,,_ o_o_
CHI_NEL SET UP
USERS SET U_
V-CHIp SET U_'
Press the PLAY/A or STOP/V but- _,,,o,G_(,,_,_,_
CAPTION [OCF]
ZERO RETURN
ton to point to "USER'S SET UP". _,_E,,c,
INDEX ,SEAr_CH
Then, press the F.FWD/I_- button.
2 Select "ALL" or "BLANK"
Press the PLAY/A or STOP/_" but-
ton to point to "REPEAT PLAY".
Press the EFWD/I_ or REW/<I
button repeatedly until your desired
selection [ALL] or [BLANK]
appears.
-US£RSSETUp-
RENTAL _O_
R£PEATPLAy IAIL
AUTG R£TURN ,iO:_I
3 Exit the Repeat Play setting
Press the MENU button on the remote control to
return to the TV mode.
4 Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY I_" appears.
• Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
• If the Rental mode is set [ON], the "RENTAL
PLAY I_" display has priority.
1"0 CA,VCEL I'llE REI'EAT PLA Y MODE
Repeat steps [I] and [2], select [OFF] using the
EFWDhI_ or REW/<I button on the remote control.
Press the MENU button on the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 22 - EN
9J27
To Next Page
Loading...
