TO CIIECK TIlE BEGIN/END TIME
I)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
3)Confirm "TIMER PROGRAMMING" is pointed.
4)Press the EFWD/I_ button. The details of pro-
grams appear on the TV screen.
5)Press the MENU button on the remote control to
return to TV mode.
• Make sure the channel you want to record is prop-
erly set in advance.
• It is not necessary to press the RECORD button for
timer recording.
• Recording begins automatically at the Start time.
• If you are recording using a Timer mode, you may
not operate the unit manually.
• The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
• If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
• If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1 Select "USER'S SET UP"
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/v but-
ton to point to "USER'S SET UP".
Then, press the EFWD/I_ button.
-M_NU- ]
TIMER F_OGRA,qJ,4CNG
P_TURE CONT_L
SETTING CLOCK
CW'NNEL SEI Up
• USER'S SET U_'
V.CHIP S£¢ UP
L^NGU^GE [EtCT,U_4]
CAWrlON [OFFI
ZERO R_IMRN
TIMESEARCH
bNOEX SE_,RCH
2 Set "AUTO RETURN" to [ON]
Pressthe PLAY/I or STOP/v but-
ton to point to "AUTO RETURN".
Press the F.FWD/I_ or REW/al
button until ION] appears.
- USER 5 SET UP - 1
nENT_- [_FI
REPEAT pLAy _l F;
AUtO RETURN [ONI
3 Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
• If you press the POWER button while tape is
rewinding, the Auto Return will stop.
4 Watch the recorded program
Press the PLAY button.
TO CANCEL THE AUTO RETURN
MODE
Repeat steps [I] and [2], select [OFF] using the
EFWD/I_ or REW/_I button.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
• Use the remote control for this procedure.
• Clock must be set to the correct time before setting
the timer.
• If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1 Select "WAKE UP TIMER"
Press the WAKE UP/SLEEP button
on the remote control once, and
confirm "ON/OFF" is pointed.
Press the EFWD/I_ or REW/_I
button until [ON] appears.
WAKE UP • ON,OFF 1-
TIMER T'ZgrApE
TIME
m
2 Select "TV" or "TAPE"
Press the PLAY/A or STOP/V but-
ton until to point to "TV/TAPE".
Press the EFWD/I_ or REW/al
button, and select [TV] or [TAPE].
_ER • TV_APE
- 29 - EN
9J27
To Next Page
Loading...
