TIMER
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE: July 6th, 2000
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
• If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be
recorded must be selected on the boxes.
• Clock must be set to the correct time and date
before setting the timer.
• TV/VCR power must be turn on to program it.
• Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)
• The channel you want to record is properly set in
advance. (See page 13.)
Avoid over lap of programs ...
There is a chance that a program will not be record-
ed. when programs overlap;
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping
programs will begin recording in sequence•
• The illustration below demonstrates the sequence
of recordings•
Program 1 10:00AM - II:00AM
Program 2 9:00AM - 10:00AM
Program 3 9:30AM - 12:00PM
Recording Sequence
Prog_m 1 i
10:_AM-11:_AM I
pregram 2 _
p_,.m3 : I
g:30AM*12;_PM ,
9:00AM i0:_AM II:_AM 12:00_
*R6'co_ding p_i_ Is _qADEO
1 Select "TIMER PROGRAMMING*'
Press the MENU button on the remote control.
Confirm "TIMER PROGRAMMING" is pointed by
pressing the PLAY/A button.
- 27 -
And press the F.FWD/I_ button. I" -M_.U-TIMERP_RAMMkNG
PIGTURE CONTROL
• If you have not yet set the clock, / s.......
CHANNEL SET UP
"MANUAL CLOCK SET' / v
LANGUAGE [ENGLISHI
If [3] t ! .... toga
appears, so, follow stops o _._._..
TFMESEARCH
[8] on page 15. Then set the timer L ...........
recording.
2 Select your desired program position (1-8)
Press the PLAY/A or STOPiV but- _ _ _, 6,o
ton to select the desired program
position.
Then, press the F.FWD_ button.
3 Set the channel number
Press the PLAY/A or STOP/v but-
ton until the desired channel num-
ber appears.
(Example: CH61 )
Then, press the F.FWD/_ button.
..............." i]
CH t_re. _N
t ii !i!!!!iif!! !i::
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.
4 Select once, every day or weekly recording
For on ce recording : ( -_,_"_.o_,_,,_
Press the PLAY/A (up) button [__ o,_ _
...s .... .
until the desired date appears. '_ ..............,:.. .,....
.. 4...... . .
(Example: "7/06" for July 6th). °'-_.......
Then, press the F.FWD/II_ but ..............
ton.
For every day recording : To record a TV program at
the same time on the same channel every day.
(Example." Monday through Sunday)
Press,_he STOP/V ,!down) button I _"_"_,_':_ ]
until EVRY DAY appears, l i ........ /
Then, press the F.FWD,'I_ but- ]..ii_i_i.:ii iii ii[
ton. l=
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example: every Monday)
Press the STOP/V (down) button ( ........... '_- "/
untd EVRY and your deswed ,| , ..... [
day of the week appear together. I,"il _i _ ii']
Then, press the F.FWD/I_ but- | !!'if:: ii :: i)/
ton. k _ " "" ")
EN
9J27
To Next Page
Loading...
