RECORDING
Make sure ...
* TV/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
You can ONLY watch the same TV program that is
being recorded.
1 Select the channel to be recorded
Press the number buttons on the CH 10]
]
remote control or the CHANNEL
• or • button.
Remember: If the TV/VCR is con-
nected to a cable box or satellite
box, the TV/VCR must be on CH3 or CH4, then the
channel to be recorded must be selected on the cable
box or satellite box.
_,,=1 i i
2 Select the tape speed
Press the SPEED button to select
the desired tape speed (SP/SLP).
, , i i i
3 Begin recording
Press the RECORD button.
i,
4 Stop recording
Press the STOP button when recording is completed.
Press the PAUSE/STILL button to
temporarily stop recording.
Press the PAUSE/STILL or ( .....
L
RECORD button to resume record-
ing. sP
NOTES:
• After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape dam-
age.
• If "CLOSED CAPTION (ON)" is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.
EN
9J27
To Next Page
Loading...
