ON SCREEN DISPLAY
To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote
control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:
When the Closed (@tion mode is OFF:
• Counter mode: After 5 seconds, only the counter
remains. To clear it, press the DISPLAY button.
*' Clock mode: After 5 seconds, only the clock and
the channel number remain. To clear them, press
the DISPLAY button.
When the (losed Caption mode is ON:
• The On Screen Display disappear after 5 seconds.
• This is true even if the MUTE button is pressed, or
the PAUSE/STILL button is pressed while record-
OFF mode Counter mode Clock mode
l Counter Clock & Channel
remains , remains
................................... ; ...................... I .........
OFF mode
ing.
SPECIAL FEATURES
This function enables you to receive the FM radio
wave broadcasting.
Clock/Counter mode
L SP _T Ol2:_
1 Set the FM mode /
Press the TV/FM button on the /
remote control. The radio frequency [
appears on the TV screen. /
L
FM 880 MHz
2 Select the radio frequency you want to receive
Pressthe CHANNEL • or • button until your
desired radio frequency appears.
NOTES:
• The radio frequency indication repeats to appear
and disappear.
• You can not record the FM radio wave broadcasting.
• If you receive a weak radio signal, you may change
the FM Antenna mode to INT(internal) or
EXT(external) by following the step below.
I)Press the MENU button. Press the PLAY/• or
STOP/v button to point to "CHANNEL SET UP".
Then, press the EFWD/I_ button.
2)Press the PLAY/• or STOP/v button to point to
"FM ANTENNA". Select lINT] or [EXT] using
the F.FWD/II_ or REW/_I button.
TO C4 NCEL "1"11L"t,'M MODE
Press the TV/FM button on the remote control to exit
the FM mode.
Magnetism from nearby appliances might affect the
color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.)The "-" indication will appear when the tape has
rewound further than "0:00:00" on the tape counter.
• When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the TV/VCR will eject the tape and turn
itself to off.
• This function is operative when Repeat Play is set
to the [OFF] position.
• The tape will not auto-rewind during timer record-
ing or One Touch Recording.
-16-
EN
9J27
To Next Page
Loading...
