Make sure ...
• TV/VCR power must be turned on.
• Insert a tape.
SEARCH
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3 Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4 To activate "ZERO RETURN" mode
Press the MENU button on the f -._.u-
/
TIMER pRO_ RAMMI_IG
remote control. P,croRE_o.rR_
SE'rClNG CLOCK
CHANNEL SET UP
Press the PLAY/A or STOP/v but- _RSSET_P
V_lP SET UP
tJ_IGUAGE ENGLISH)
ton to point to "ZERO RETURN". _T_ td_
. _o RETURN
Then, press the EFWD/I_ button. _
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTES:
• Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.
• This function will not operate in recording mode.
• This function is not operative when a cassette tape
is not inserted in the TV/VCR.
In the example below: To watch a program after 2
hour 50 minutes from the present position, in either
direction.
11nsertatape,
2 Select "TIME SEARCH" mode
Press the MENU button on the I" -_
remote control, r,_,_,c,_,_.,..,,_.o_
SEarING CI__
PA4hqNEL _i_" Up
Press the PLAY/A or STOP/T but- _.'_o_
V-CHIP SET UP
ton to point to "TIME SEARCH". _*,,,_,_'_'_'_
ZEI_ REIURN
Then, press the F.FWD/II_ button. '_'_"
_NDEX SEARCA_
3 Enter your desired time
Press the PLAY/& or STOP/_¥ but- l,, ]
ton until your desired time appears. _ %:_?_
]
(Example: "2:50' stands for 2 hours /
50 minutes) /
If you wish to cancel the Time [
Search at this point, press the MENU button on the
remote control.
4 Begin Time Search
By pressing the REW/_I or EFWD/I_ button, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
7D CANCEL THE TIME SEARCH at this
poittt
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
-23- EN
9J27
To Next Page
Loading...
