Sym Quad Lander 250 - Page 17

1. GENERAL INFORMATION
1-12
Frame Torque Values
Item Q’ty Thread Dia. (mm) Torque Value(kgf-m) Remarks
Handlebar upper holder bolt
4 6 2.40
Steering shaft nut
1 10 5.00
Steering tie-rod nut
4 10 5.00
Knuckle nut
2 10 5.00
Steering shaft holder bolt
2 8 3.40
Tie rod lock nut
4 10 3.60
Handlebar under holder nut
2 8 4.00
Front wheel nut
8 10 2.40
Front axle castle nut
2 14 5.00
Rear axle castle nut
2 14 5.00
Rear wheel nut
8 10 2.40
Engine hanger nut
4 12 8.50
Rear axle holder bolt
4 12 9.20
Drive gear bolt
2 10 4.6
Driven gear nut
4 10 4.6
Swing arm pivot bolt
1 14 9.20
Front suspension arm nut 4 10 5.00
Front / Rear cushion mounting bolt 6 10 4.60
Brake lever nut
2 6 1.00
Brake hose bolt
13 10 3.50
Brake caliper bolt
6 6 3.25
Brake disk mounting bolt
11 8 4.25
Air-bleed valve
3 5 0.50
Exhaust muffler mounting bolt
2 8 3.00
Exhaust muffler connection nut
2 7 1.20
To this chapter contents