Sym Quad Lander 250 - Handle Protect Cover; Front Center Cover

13. BODY COVER
13-4
Remove meter stay and meters.
Remove 3 screws and disassembly handle cover
and meter.
Installation
Install in reverse order of removal procedures.
Handle protect cover
Loosen 2 bolts from handle protect cover, and
then remove handle protect cover.
Installation
Install in reverse order of removal procedures.
Front center cover
Remove
Loosen 2 screws from the front center cover.
Please disassemble first then push the cap
upward, and then remove front center cover.
Installation
Install in reverse order of removal procedures.
3 Screws
2 bolts
To this chapter contents
2 screws