Getting Started 1 - 11
ScanParam Any scanner parameter. Multiple entries are
allowed. Sent after reset or whenever
scanner is powered.
For example:
ScanParam=0xf0,0x00,0x01
ScanParam=0xee,0x01
ScanParam=0x38,0x00
Variable N/A
Separator Separator character Byte ',’
Sleep Time in seconds before device enters sleep
mode if no activity is detected
Word 0
Suffix Add suffix to decode data Byte <none>
TimeFormat Time format for data stored in batch 1 = 12h
0 = 24h
24h
WakeUpBeep Enable or disable wake up beep 1 = Enabled
0 = Disabled
Disabled
WakeUpLED Enable or disable wake up LEDs 1 = Enabled
0 = Disabled
Disabled
ZeroOutHIDClassOfDevice Some versions of Broadcom stack
experience issues when connecting to HID
devices. Enable this feature if this is the
case.
1 = Enabled
0 = Disabled
Disabled
Table 1-1
Config.ini File Content (Continued)
Name Description Values Default
To Next Page
Loading...
