Symmetricom ATS-6511A User Manual

ATS-6511A
ATS-6511B
ATS-6511C
Dual Fiber Input Distribution
Users Guide
Version 5.x
Release K
Sep 2013

Symmetricom ATS-6511A Specifications

General

Brand	Symmetricom
Model	ATS-6511A
Category	Amplifier
Language	English

Summary

Installation and Setup

Powering on the ATS-6511

Step-by-step guide for powering on the ATS-6511 unit and its self-test.

System Communication Setup

Configuring network (DHCP, static IP, firewall) and serial communication for system access.

ATS-6511 Module Installation

Details on power supplies and output card modules for the ATS-6511.

Fiber Optic Input Behavior

Fiber Modes and Calibration

Details on two-way, two-way disabled, and one-way fiber calibration modes.

External Frequency Reference

Operations

Front Panel Indicators

Software Management

Information on checking current version, updating software, and declassifying the system.

System Interfaces and Ports

Status Command Usage

System Verification Procedures

Steps to verify proper system operation after installation and setup.

Theory of Operations

Timing Signal Generation

Explanation of how timing signals are generated and derived from references.

Startup Sequence

Troubleshooting

Front Panel Indications and Alarms

Component-Specific Troubleshooting

Diagnosing issues with power supplies, fiber inputs, outputs, clock, temp, fans, and communication.