Systema K21 - Page 25

25
Rev. 12GB0712
SYSTEMA S.p.A.
AIRTIGHT GAS CONVECTORS
7) Fix the gas convector (4) to the back connector
using the screws included in the equipment - they
have to be screwed on the cage nuts (3)
8) Cut the coaxial tube at the right measure and fit it
on the air box (5) and on the Ø60 collar (7)
Draw 29
WALL
SIDE FUME KIT
SIDE FUME KIT
WALL
VIEW B
VIEW A
GROUND
WALL
HOLE Ø 60mm