SystemAir Danvent TIME - I.1.5 Lifting a Unit with Preinstalled Brackets on the Base Frame for Lifting; I.1.6 Roof Unit with Bitumen Roof; I.1.7 Roof Unit with Steel Roof

Default Chapter3

Table of Contents3

Manufacturer10

B. Name Of Machines10

C. Declaration Of Conformity - Example11

D. General Descriptions, Dangers And Warnings12

D.1 Overview Via Pictograms on the Inspection Side of the Unit12

D.2 Data about the Unit According to Cards and Labels in and on the Unit17

D.3 Hand Terminal (Optional for DV Units - Always Standard for TIME Units)20

D.4 Dimensions of the Units - Selected Examples21

D.5 Ordinary Automatically Operation - Only Manual Operation by New Parameters22

D.6 Warnings about Dangers22

Drawings, Diagrams, Guides and Instructions for the Use, Maintenance and Repair22

Unintended Use And Misuse - Inappropriate Applications For The Machine23

23

H.1 Air Handling Unit in Operation23

Employees In Charge Of Operation/Control/Maintenance23

F1. Employees That Take Care Of Ordinary Operation23

Intended Use And Range Of Applications23

Instructions for Unloading on the Site as Well as Installation and Connection24

I.1. Unloading on the Site24

I.2. Installation - Mechanical26

I.3. Installation - Electrical31

I.4 Installation - Pipes for Water - Hot and Chilled, Valves and Drains33

Installation and Assembly Instructions for Reduction of Noise and Vibration Emissions36

Instructions for Putting into Service, Adjustments, Use and Commissioning37

K.1 Print-Outs on Paper37

K.2 Electronic Media37

K.3 Documentation Is Available for Download from Https://Techdoc.systemair.dk38

K.4 Start-Up by Installer38

K.4.1 Checklist, Relevant Values38
- K.4.1.1 Checklist Prior to Start-Up38
- K.4.1.2 Switch on Power38

K.5 Adjustments and Use38

K.6 Description of Functions38

K.7 Commissioning43

Information about the Residual Risks that Remain Despite the Inherent Safe Design Measures, Safeguarding and Complementary Protective Measures Adopted43

L.1 Unit Casing43

L.1.1. Design of the Machine to Make Transport Safe43

L.2 Common for All Unit Sections43

L.2.1 Risk Caused by Surfaces, Edges and Corners43

L.3 Common for All Unit Sections by Insufficient Lighting44

L.3.1 Risk Caused by Insufficient Lighting Inside Sections44

L.4 Dampers Type DVA - DVB - DVM - DVP - Bypass Dampers in DVQ44

L.4.1 Risk Caused by Maintenance and Cleaning of Dampers44

L.5 Attenuators Type DVD44

L.5.1 Risk Caused by Maintenance and Cleaning of Attenuators44

L.6 Filters Type DVG - DVF44

L.7 Plug Fans Type DVE45

L.8 Batteries for Heating and Cooling Type DVR - DVH - DVK, Cooling Compressor46

L.9 Cooling Compressor Units Type DVU - DVU-C46

Instructions on the Protective Measures to be Taken by All Service Technicians During Repair and Maintenance46

The Essential Characteristics of Tools Which May be Fitted to the Machinery47

The Conditions of Stability During Use, Transportation, Assembly, Dismantling When out of Service47

O.1 Installed Reliable to Avoid Units to be Tilted or Moved by the any Storm47

O.2 Transport of Section with Cooling Compressor Unit47

O.3 Disposal of the Cooling Compressor System - Type DVU and DVU-C47

O.4 Generel Disassembly - Sharp Edges47

P. Instructions For Machinery Where These Are Regularly To Be Transported48

The Operating Method to be Followed in the Event of Breakdown. Safe Restart48

Adjustment And Maintenance Operations48

R.1 Shutdown of the Unit to a Safe State48

R.2 Recommended Maintenance Intervals49

R.3. Filters - Sizes and Numbers50

R.4. Changing the Internal Battery in the Controller51

R.5 Other Functions to Maintain52

Instructions Designed to Enable Adjustment and Maintenance to be Carried out Safely, Including the Protective Measures that Should be Taken During These Operations57

S.1. Protective Measures and Additional Protective Measures57

The Specifications of the Spare Parts to be Used, When These Affect the Health and Safety of Operators59

T.1 Spare Parts - Mechanical59

T.2 Spare Parts - Electrical59

Information On Airborne Noise Emissions Exceeding 70 Db(A)59

Annex 1 Declaration Of Conformity With Unique Production Number59

SystemAir Danvent TIME - I.1.5 Lifting a Unit with Preinstalled Brackets on the Base Frame for Lifting; I.1.6 Roof Unit with Bitumen Roof; I.1.7 Roof Unit with Steel Roof

Table of Contents

Other manuals for SystemAir Danvent TIME

Related product manuals