Note
Setting Up Your Device 27
Device Privacy Code
If you want to secure your device from unauthorized access once your device has
gone into key guard mode, you will first need to set up a privacy code:
1 Press JUMP to open the Jump screen. Press MENU then select
Settings > Key Guard & Security
.
2 Scroll down to the Privacy Lock group box. Highlight ,
then press the trackball to select it.
3 Enter a three-digit code using the keyboard or the dial:
At the prompt, re-enter your code to verify.
4 A “New Combination Enabled” message appears. Select OK.
5 Press DONE to save your settings and return to the Jump screen.
You can still make emergency calls from the key guard screen even if privacy code
is enabled by opening the display then pressing
MENU + JUMP .
Sound Profiles
To create a new sound profile or modify an existing profile, press JUMP , then press
MENU and select Settings > Sound Profiles. You can have up to eight profiles total.
The system provides six profiles by default.
To Next Page
Loading...
Need help?
General
