Using the Applications 49
Address Book
Add a Contact to the Address Book
You can store up to 2000 contacts in your Address Book.
1 Press JUMP to go to the Jump screen. Scroll to highlight Address Book, then
press the trackball to open the application.
2 Press MENU to open the menu. New Contact is selected by default; press the
trackball to go to the New Contact Identity screen.
3 To create a contact, you only need to type basic “identity” information: a
First
or Last name. On this screen you can also provide a Middle name and a
Nickname, as well as select an icon.
4 To select an icon, roll the trackball up to highlight , then press the trackball
to open the icon selector. Roll the trackball to highlight the icon you want, then
press the trackball to select it.
To assign a
Photo Caller ID icon, select from the icon selector, which will
open the Browse Photo Albums screen. Then, from this screen:
To select a photo already in an album, roll the trackball to highlight the photo
you want to associate with the contact, then press the trackball to select it (a
check mark will appear under the photo). Press
DONE .
To capture a new photo, press . Compose your photo, press to capture,
then
DONE to save it. Press DONE again to view the album contents.
Select the photo (a check mark will appear under the photo).
Press
DONE .
A smaller version of the photo now appears on the Identity screen and will be
used to identify that contact on incoming call notifications.
To Next Page
Loading...
Need help?
General
