5.2.2.7. System Properties
It can view the software version, Operation
System version, remaining storage memory, and
other system information.
Press << key at the top of the left corner for to
go back to last step, or press other options to
go to next step.
5.2.2.8. Set password
Note: Default password: 9999 is for to access parameter settings.
Select Password, it will ask security password,
input default password. Then display will be show
to input new password
Input new password and confirm password (re-
enter new password) and Press OK to confirm or
Press cancel to escape.
Note: Password cause is sensitive; Make sure you do not forget the entered password. If the
password is lost, scale must want to be re-programming for to further use. All saved data will not
recover back.
5.2.2.9. Reset database
Reset Record Data: system will clear all
accumulation records from the database.
Reset All database, system will clear all data from
the database.
Press < key at the top of the left corner for to go
back to last step, or press other options to go to
next step.
Note: Please do this operation carefully. This operation will remove all data from the database, it
will not recover back.
To Next Page
Loading...
Need help?
General
