Takeuchi TB1160W User Manual

2-20
CONTROLS
MULTI-INFORMATION DISPLAY
E. Glow & DPD auto regeneration /inhibit
indicator lamp
........ Engine being preheated
........ DPD auto regeneration
under way
........ DPD auto regeneration
inhibit
• Glow indicator lamp
This indicator lamp turns off when the
engine preheating is completed.
• DPD auto regeneration under way
The DPD regeneration is automatically
performed by the engine, when certain
criteria are met. The operator only has to
check the display.
• DPD auto regeneration inhibit
The DPD manual regeneration inhibit
symbol appears on the display when the
DPD manual regeneration under way or
the DPD auto regeneration under way is
cancelled.
Refer to “DPD manual regeneration /inhibit
select switch” on page 2-37.
D. Deceleration indicator lamp
........ Automatic deceleration
mode
........ Deceleration mode
........ Travel pedal mode
• Automatic deceleration mode
It flashes when the automatic deceleration
switch is pressed and remains lit while in
the deceleration mode.
Refer to “Deceleration button” on page
2-42.
Refer to “Automatic deceleration switch”
on page 2-39.
• Deceleration mode
This lamp turns on when the deceleration
button is pressed. The lamp lights up to
indicate that the engine is in the
deceleration mode at low idling speed
(1000 rpm).
• Travel pedal mode
This lamp turns on when the travel pedal
button is pressed. The engine RPM can
be controlled with the travel pedal while
this lamp is on.

Takeuchi TB1160W Specifications

General

Brand	Takeuchi
Model	TB1160W
Category	Excavators
Language	English