Operating Procedures
Operations Possible with this
Machine
Excavating
1. Set the dozer blade on the side opposite
the side you want to dig on.
2. Use the arm and bucket and dig with
shallow, long strokes. The digging force
is strongest when the boom and arm
angle is 80 to 120°. Use this angle for
effective digging.
Digging Ditches
Mount a bucket suited for digging ditches
and set the crawlers parallel to the ditch to
be dug for greater efficiency.
When digging wide ditches, dig the sides
first, the center later.
Digging Side Ditches
Use the offset function to dig side ditches
as shown in the diagram.
Loading
When loading dirt in a truck, starting from
the back of the truck’s bed makes for easier
loading and increases the amount of dirt
that can be loaded.
Also, use a small slewing angle for greater
efficiency.
To Next Page
Loading...
