Rollshutter Installation Instructions, 16
©Copyright TALIUS
Section 11: Activating Rollshutter Stoppers
11.1a) Rollshutter equipped with concealed stoppers with swivel heads: Use a screwdriver to turn the heads perpendicular to
the bottom profile.
11.1b) Rollshutter equipped with concealed stoppers with fixed heads. Three methods of insertion:
i)
Let the curtain hang beneath the bottom of the guide rails and insert the stoppers.
ii)
If the above method is not feasible unscrew the bottom of one guide rail and pull it away from the opening.
Once the bottom profile is exposed insert the stopper. Repeat this for the other side.
To Next Page
Loading...