Tally Dascom 1225 - Page 32

Tally Dascom 1225
18
Calibrate PE
sensor
sensitivity
{S1}+[S2] -
 Out-of-paper: Beeps once. Automatically loads a form in 10
seconds.
 Paper loaded: Calibrates PE sensor with paper loaded and
save the sensitivity value. Beeps 5 times when completed.
 [NOTE: There are 2 independent sensors for rear tractor and
front friction.
Restore default
PE sensor
sensitivity
[S2]+{S4} Resets PE sensor sensitivity to factory defaults. Beeps twice
when completed.
Clear Buffer and
Reset
{S1}+[S5] -
 Clears the print buffer. Beeps once upon completion.
 Pressing S1 longer initializes the printer to default settings.
Beeps 3 times upon completion.