Talsa F14s - 10 Declaration of Conformity

HYDRAULIC PISTON FILLERS F14/25/35/50 INSTALLATION AND OPERATING MANUAL
© Talsabell s.a. All rights reserved. EN - 24 V-1.3 last revision: 07/2018
10. Declaration of conformity
EC-DECLARATION OF CONFORMITY
The manufacturer:
Talsabell s.a., Polígono Industrial V. Salud, 8, E-46950 Xirivella (Valencia), Spain
hereby certifies that the following described machine in its conception, construction and form put by him into circulation is in accordance with the directives of the European Community regarding
health and safety requirements. This declaration is no longer valid if the machine is modified without the manufacturers consent.
Generic Denomination: Hydraulic Piston Filler
Function: meat filling machine
Type/Model: F14s, F25s, F35s, F50s
Serial number: please refer to specification plate on the machine
Applicable Directives of the European Union:
 Machine Directive 2006/42/EC
 Low Voltage Directive 2006/95/EC
 Electromagnetic Compatibility Directive 2004/108/EC
Applicable Harmonised Standards:
 EN 1672-2:2005+A1:2009: Food processing machinery - Basic concepts - Part 2: Hygiene requirements
 EN 60204-1:2006: Safety of machinery - Electrical equipment of machines - Part 1: General requirements
 EN ISO 12100:2010: Safety of machinery - General principles for design - Risk assessment and risk reduction
 EN 61000-6-2:2005: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
 EN 61000-6-4:2007+A1:2011: Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard industrial environments
 EN 13570:2005+A1:2010: Food processing machinery - Mixing machines - Safety and hygiene requirements
Authorized person for the technical documentation:
 Pablo Escribano, Talsabell s.a., Polígono Industrial V. Salud, 8, E-46950 Xirivella (Valencia), Spain
Valencia, 1
st
February 2018
Joseph Belloch
Director Health & Safety