EasyManuals Logo

Tandy 1000 Owner's Manual

Default Icon
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Chapter
1
t
4.
Attach the bracket (A) to the expansion board and secure its left edge
with the screw supplied with the bracket. Mount the supplied holder on
the expansion board with longer side down, and secure it to the expan-
sion board and right edge of the bracket as shown in Figure
2. Do
not
overtighten the screws.
Figure
2.
Memory
PLUS
Expansion Board
5.
Packaged with the Modem Board are
3
nylon stand-offs used to help
support the Modem Board. Insert the larger end of each stand-off into
one
of
the holes on the Modem Board, as shown in Figure
3.
Figure
3.
Modem Board and Stand-Offs
Note:
If you are planning to use the Modem with
a
multi-line
telephone, make the modification now. Refer to “Multi-line”
in the section
Telephone Connections
later in this chapter.
7

Other manuals for Tandy 1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tandy 1000 and is the answer not in the manual?

Tandy 1000 Specifications

General IconGeneral
ProcessorIntel 8088
Processor Speed4.77 MHz
RAM128 KB (expandable to 640 KB)
Operating SystemMS-DOS 2.11
ManufacturerTandy Corporation
Release Year1984
StorageSingle or double 5.25" floppy disk drive (360 KB), optional hard drive
SoundTandy 3-voice sound
PortsParallel, Serial
GraphicsCGA (Color Graphics Adapter)
Graphics Modes320x200, 640x200

Related product manuals