Targetmax NT-20A - Year Digit Selection; Year Digit Setting

- 11 -
9. Setting the 2 or 4 Year Digit
Example: Set the Year imprint to 4 digits.
Press the {Select} button and position Press the {Change} button to set at
“2”
the ▲ under the “YEAR DIGIT” mark. And then press the {Set} button.
At that moment, the flashing digit indicates
“Year Digit Options”
(The flashing means it can be changed)
Year Digit Option Print Example
1 2 Digits 08 SEP 03 14:50
2 4 Digits 08 SEP 2003 14:50
2
After you finish setting the year digit, press the
{Set} button once again.
Now the year digit setting has been completed.
Replace the cover and lock.
*** Important: If you do not complete Step 2, the
Time Stamp will not print.