Targetmax NT-20A - Date Adjustment; Date Setting

- 8 -
6. Setting the Date
Example: Setting the date to September 2, 2005
Press the {Select} button and position the ▲
under the “DATE” mark. At that moment,
the “Year” flashes.
(The flashing means it can be changed)
Press the {Change} button to set at “05” And
then press the {Set} button. At that moment,
the flashing changes from “Year” to “Month”
Press the {Change} button to set at “09”
And then press the {Set} button. At that
moment, the flashing changes from
“Month” to “Date”
Press the {Change} button to set at “02”
And then press the {Set} button.
After you finish setting the date,
press the {Set} button once again.
Now the time setting has been
completed.
Replace the cover and lock.
*** Important: If you do not
complete Step 5, the Time Stamp
will not print.