- 14 -
11. Change the “Leading Zero”
Example: Change the Leading Zero to disabled.
Press the {Select} button and position Press the {Change} button to set at “1”
the
▲
under the “LEADING ZERO” mark. And then press the{Set}button.
At that moment, the flashing digit
indicates “Leading Zero Options”
(The flashing means it can be changed)
Leading Zero Option Print Example
1 ZERO Disabled SEP 08
PM
4:00
2 ZERO Enabled SEP 08
PM
04:00
After you finish setting the Leading Zero,
press the {Set} button once again.
Now the leading zero has been completed.
Replace the cover and lock.
*** Important: If you do not complete Step 2,
the Time Stamp will not print.
To Next Page
Loading...