- 25 -
16. Setting the Daylight Saving Time (1)
1. D.S.T. Execution time
At 2:00 a.m. on the first day of summer time, the clock automatically gains one
hour to show 3:00 a.m.
When 2:00 comes on the last day of the summer time period, it loses one hour
and returns to 1:00 a.m.
2. Setting the daylight saving time
Example: Start date Thursday, May 1, 2003
End date Wednesday, October 1, 2003
If set as the above, the unit remembers the start date as the first Thursday of May and
the end date as the first Wednesday of October. Once set, the unit automatically
updated the settings every year thereafter. Display will shown “----” if no daylight
saving time is required.
Set the starting date:
Press the {Select} button and position the
▲
under
the “D.S.T. START” mark. At that moment, the “Month”
flashes.
(
The flashing means it can be changed.
)
Press the {Change} button to set at “05” And then press
the {Set} button. At that moment, the flashing changes
from “Month” to “Date”
Press the {Change} button to set at “01” And then press
the {Set} button.
After you finish setting the start date, press the {Set}
button once again.
Now set the ending date.
To Next Page
Loading...