- 26 -
16. Setting the Day Light Saving (2)
Example: End date Wednesday, October 1, 2003
Set the starting date:
press the {Select} button and position the
▲
under the “D.S.T. END” mark. At that moment, the
“Month” flashes.
(
The flashing means it can be
changed.
)
Press the {Change} button to set at “10” And then
press {Set} button. At that moment, the flashing
changes from “Month” to “Date”
Press the {Change} button to set at “01” And then
press the {Set} button.
After you finish setting the date end, press the
{Set} button once again. Now the setting has
been completed. Replace the cover and lock.
*** Important: If you do not complete Step 4,
the Time Stamp will not print.
To Next Page