- 29 -
19. Setting the Password
Example: Set the password “1234”
(You may set a password by any 4-digit number from 0001 to 9998)
Press the {Select} button and position the
▲
under the “PASSWORD” mark. At that moment,
the first two digits flash.
(
The flashing means it can
be changed.
)
Press the {Change} button to set at “12” And then
press {Set} button. At that moment, the flashing
changes to the last two digits
Press the {Change} button to set at “34” And then
press {Set} button.
After you finish setting the password, press the {Set}
button once again. Now the setting has been
completed. Replace the cover and lock.
*** Important: If you do not complete Step 3, the
Time Stamp will not print.
To Next Page
Loading...