Targetmax NT-20A - Customized Comments Setup; Print Order and Position; Set 1 st Comment Line

- 15 -
12. Setting the Preprogrammed Comments
Example: Change the comment to “FAXED”
Press the {Select} button and position Press the {Change} button to set at “9”
the ▲ under the “COMMENT” mark. And then press the {Set} button.
At that moment, the flashing digit
indicates “Comment Options”
(The flashing means it can be changed)
After you finish setting the Comment, press the
{Set} button once again.
Now the comment has been completed. Replace
the cover and lock.
*** Important: If you do not complete Step 3,
the Time Stamp will not print.