- 31 -
21. Canceling the Password
The code “0000” must be entered to cancel the password.
Input the correct password and entered to the
program.
Press the {Select} button and position the
▲
under the “PASSWORD” mark. At that
moment, the first two digits flash.
Press the {Change} button to set at “00” And
then press the {Set} button. At that moment, the
flashing changes to the last two digits.
Press the {Change} button to set at “00” And
then press the {Set} button.
After you finish canceling the password, press
the {Set} button once again.
Now the canceling has been completed.
Replace the cover and lock.
*** Important: If you do not complete Step 3,
the Time Stamp will not print
To Next Page
Loading...