Tascam DA-98HR - Meter Unit (MU-8824)

3 – Connections–Connection to other TASCAM units
22 TASCAM DA-98HR
Though the slave will receive its word clock from the
master unit, the master itself must receive its word
clock from the other digital audio device.
In this case, the master unit will have its clock source
set to
WORD, and the slave will receive its clock
from the master unit through the
SYNC IN s.
3.4.3 Meter unit (MU-8824)
The optional MU-8824 external meter bridge unit
can be connected using a PW-88M cable from the
METER UNIT connector v. You do not need to
make any settings on the DA-98HR when connecting
the meter unit.