Tascam DA-98HR - Input Patch Setup

13 – Options/specifications/reference–MIDI System Exclusive
TASCAM DA-98HR 95
13.6.6 Input Patch setup
<cc> = 0b
There are two data bytes: <destination> and
<source>.
<destination> is the tape track number – 1 (00h
through 07h)
<source> is either the slot input channel number – 1
(00h through 07h), the digital input channel number
+7 (08h through 0Fh), or the tape track number + 15
(10h through 17h).
In addition, if the <source> is set to 18h, the <desti-
nation> is muted.