12 – Maintenance and settings–Checking version numbers
TASCAM DA-98HR 87
12.6 Checking version numbers
In case of problems, you may need to quote the ver-
sion number of the DA-98HR’s internal software
components to a TASCAM representative.
1 Go to menu group F:
2 Within menu group F, move the cursor so that
it is by the
Sys ver (system version),
Front ver (front panel software ver-
sion) or
Servo ver (servo control soft-
ware version) field. The version number of the
appropriate software will be shown on the bot-
tom line of the display.
12.6.1 Software upgrades
TASCAM pursues a policy of continuous improve-
ment to products, and there may be future enhance-
ments to the DA-98HR software. Your TASCAM
dealer will be able to advise you of developments in
this area.
˘Sys ver Front ver
Servo ver Dr Total
Dr Search
Ver 32.06
To Next Page
