This function copies the audio data from between the IN
and OUT points on the COPY source track, and inserts it
on the COPY destination track starting from the TO point.
This operation does not change the COPY source track.
This operation inserts recorded data into the COPY
destination track. The recorded data on the COPY
destination track after the TO point is offset by the amount
of time used by the inserted audio data. Therefore, the
COPY destination track becomes longer.
You can make multiple copies in a single operation. In
other words, you can insert a designated number of
repetitions of the COPY data into the COPY destination
track from the TO point.
The following parameters are used in this operation.
SOURCE TRK (
•
1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
)
IN/OUT/TO
•
DESTINATION TRK
•
COPY TIMES
•
MOVE/PASTE
The audio data between the IN and OUT points on
the MOVE source track is removed and pasted in the
MOVE destination track starting from the TO point. This
operation leaves a silence between the IN and OUT points
on the MOVE source track.
This operation overwrites recorded data on the MOVE
destination track. Therefore, the length of the MOVE
destination track is not changed.
The following parameters are used in this operation.
SOURCE TRK (
•
1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
)
IN/OUT/TO
•
DESTINATION TRK
•
MOVE/INSERT
The audio data between the IN and OUT points on the
MOVE source track is removed and inserted in the MOVE
destination track from the TO point. This operation leaves
a silence between the IN and OUT points on the MOVE
source track.
This operation inserts recorded data into the MOVE
destination track starting from the TO point. Therefore,
the MOVE destination track becomes longer.
The following parameters are used in this operation.
SOURCE TRK (
•
1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
)
IN/OUT/TO
•
DESTINATION TRK
•
OPEN (insert silence)
This function inserts silence between the IN and OUT
points on the selected track.
This function splits the track at the IN point and shifts the
recorded data after the IN point to after the OUT point.
Therefore, the track becomes longer.
The following parameters are used in this operation.
OPEN TRK (
•
1
to
8
,
1
/
2
,
3
/
4
,
5
/
6
,
7
/
8
,
1
-
8
,
ALL
)
IN/OUT
•
8 – Editing Tracks
To Next Page
Loading...
Need help?
General
