DM-3200 Release Notes
TASCAM DM-3200 Release Notes V1.50 11
By installing an IF-FW/DM FireWire interface card (sold
separately) into Slot 1 of the DM-3200 Ver1.20, you can
transfer audio data between your computer and the DM-3200.
An IF-FW/DM inserted into Slot 2 will not function.
Figure 1 is an example of the panel display when an
IF-FW/DM card is installed in Slot 1.
For more details, please refer to the IF-FW/DM documentation.
FireWire card support
Surround monitor card support
By installing an IF-SM/DM surround monitor card (sold
separately), you can add integrated surround monitoring to
the DM-3200.
Figure 1 shows an example of the screen display when
IF-SM/DM card is inserted in Slot 2.
For more details, please refer to the owner’s manual that
comes with the IF-SM/DM card.
Figure 1: SLOT screen when an IF-FW/DM and an
IF-SM/DMare installed
Naming the mixer
DM-3200 Ver1.20 allows you to set and edit mixer names
so that you can easily differentiate between multiple
mixers with the TASCAM Mixer Companion computer
application.
1 On the UTILITY SYSTEM screen, move the cursor to
the EDIT button in the MIXER NAME section. Press the
ENTER key.
Figure 2: UTILITY>SYSTEM screen
A pop-up window will appear for editing the mixer
name.
Figure 3: Name edit pop-up screen
You can cancel the entered name by pressing the
POD3 key (CANCEL).
To Next Page
Loading...
Need help?
General
