76
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Changing the squeegee blades
Scraper blade change
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 250 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
• Place the machine on the parking
support.
A: For traction batteries; use the
parking support on the right
B: For lithium-ion batteries; use the
parking support on the left
• Remove the squeegee by turning the
locking screws.
• Screw off the triangular handle (1)
and pull the blade body (2) out of the
squeegee body.
• Place the machine on the parking
support.
A: For traction batteries; use the
parking support on the right
B: For lithium-ion batteries; use the
parking support on the left
• Press the scraper down by hand until
the lugs (1) for the cover plate ap-
pear.
• Press the edges of the lugs (2) to the
rear until the cover plate (3) can be
removed.
• Now you can turn the blades or replace them.
• Now remount the cover plate (3). Ensure that the snap-in
lugs (2) latch correctly.
Attention:
Danger of injury from clamping the fingers!
A
To Next Page
Loading...
