Taylor H60 - Section 5: Operator Guidance (Continued)

20
Model H60Important: To the Operator
Screen “L” is the STANDBY MODE. To place the
freezer in the STANDBY mode, move the cursor under
the word “yes”. Press the MENU/SEL key to execute
the command. Pressing the MENU/SEL key again will
return you to the main screen. To exit the STANDBY
mode and place the unit in AUTO, press the AUTO key
once. Pressing the AUTO key again will place the unit
in the OFF mode.
STANDBY MODE
STANDBY YES NO
---
<--- ---> SEL