Taylor H60 User Manual

OPERATOR’S
MANUAL
Model H60
Shake Freezer
Original Operating Instructions
055165- M
6/01/01 (Original Publication)
(Updated 6/26/15)

Taylor H60 Specifications

General

Brand	Taylor
Model	H60
Category	Freezer
Language	English

Summary

Section 1: Installer Guidance

Installer Safety Precautions

Safety guidelines for installing Taylor equipment, including PPE and lockout procedures.

Site Preparation and Environmental Guidelines

Section 1: Installer Guidance (Continued)

Electrical Connection Standards

Guidelines for power supply, grounding, and local electrical codes.

Section 3: Safety Precautions

General Operational and Service Safety

Key safety warnings for operating and servicing the equipment.

Section 3: Safety Precautions (Continued)

Product Handling and Machine Operation Safety

Safety guidelines for product temperature, operation, and physical hazards.

Section 5: Operator Guidance (Continued)

Operating Screen Message Interpretation

Heat Cycle Displays and Lockout Conditions

Displays for HEAT cycle phases and causes of hard lockout.

Soft Lock and Operational Restrictions

Explanation of soft lock conditions and resulting operational restrictions.

Operator Menu, Faults, and Clearing Tones

Accessing operator menu, interpreting faults, and clearing tones.

Section 6: Operating Procedures

Beater Drive Shaft Assembly

Section 6: Operating Procedures (Continued)

Beater Assembly and Blade Checks

Unit Sanitizing Procedures

Step-by-step guide for sanitizing the entire unit.

Sanitizing Steps and Initial Mix Priming

Daily Opening Procedures

Disassembly and Component Cleaning

Section 7: Operator Checklist

Cleaning, Sanitizing, and Bacterial Count Checks

Section 7: Operator Checklist (Continued)

Section 8: Troubleshooting Guide

Soft Lock and Product Dispensing Issues

Troubleshooting soft lock messages and product dispensing problems.

Section 8: Troubleshooting Guide (Continued)

Hard Lock and Product Consistency Issues

Troubleshooting hard lock conditions and product consistency problems.

Syrup System and Hopper Temperature Issues

Drive Shaft and Cylinder Scoring Issues

Leakage, Operation, and Feeding Problems

Section 10: Equipment Limited Warranty

Equipment Warranty Terms and Conditions

Details of the limited warranty for the equipment, including coverage.

Section 10: Equipment Limited Warranty (Continued)

Warranty Exclusions and Legal Remedies

Section 11: Parts Limited Warranty

Parts Warranty Classification and Conditions

Warranty periods and conditions for genuine Taylor parts.

Section 11: Parts Limited Warranty (Continued)

Parts Warranty Exceptions and Legal Remedies