TC Electronic Ditto User Manual

Ditto Stereo Looper English Manual a
Important safety instructions 1
EMC / EMI 2
Explanation of graphic symbols 2
About this manual 3
Introduction 3
Setup 4
Setup examples 5
Inputs, outputs, controls 9
1. Power input 9
2. Audio inputs 9
3. Audio outputs 9
4. Footswitch and LED 9
5. Loop / backing track level control knob 9
6. Store / Delete /
Backing track level switch 9
7. USB port 9
Creating loops 10
Storing, importing and exporting loops 14
Bypass modes 17
Footswitch LED reference 17
Updating the firmware 18
Changing the batteries 19
Technical specifications 19
Frequently asked questions 20
Getting support 20
21
Product Ditto Stereo Looper
Product (firmware) version 1.0
Document English Manual
Document version / date 2015-04-28

TC Electronic Ditto Specifications

General

Type	Looper Pedal
Looping Time	5 minutes
True Bypass	Yes
Power Supply	9V DC
Mono/Stereo	Mono
Number of Loops	1
Undo/Redo	Yes
Input Impedance	1 MΩ
Output Impedance	100 Ω
Power Supply (center negative)	Yes
Current Draw	100 mA
Dimensions	48 x 48 x 93 mm
Weight	300 g