Teac AG-360 - SPECIFICATIONS; Amplifier Specifications; FM Tuner Specifications; AM Tuner Specifications

SPECIFICATIONS
Amplifier Section
Output Power:
Front:
50 watts per channel minimum RMS, both
channels driven into 8 ohms from 50 Hz to 20
kHz with no more than 0.9% total harmonic
distortion
Input Sensitivity/Impedance:
PHONO (MM); 2.5 mV/47 k ohms
AUX, CD, TAPE; 200 mV/20 k ohms
Frequency Response:
20 Hz - 20 kHz +1 dB (PHONO)
10 Hz - 40 kHz +1, -3 dB (AUX, CD, TAPE)
Total Harmonic Distortion:
0.05% at 20 watts
Signal-to-Noise Ratio (IHF A Network):
PHONO (MM); 80 dB
AUX, CD, TAPE; 85 dB
Tone Control:
Bass; +10 dB at 100 Hz
Treble; +10 dB at 10 kHz
Loudness Control (Volume at -30 dB Position):
+7 dB at 100 Hz, +4 dB at 10 kHz
FM Tuner Section
Tuning Range:
87.5 MHz - 108.0 MHz (100 kHz steps)
(U.S.A./Canada/South America)
87.50 MHz - 108.00 MHz (50 kHz steps)
(General Export)
Usable Sensitivity (IHF):
Mono; 14.7 dBf
50 dB Quieting Sensitivity:
Mono; 22.1 dBf/Stereo; 42.1 dBf
AM Suppression Ratio (1 kHz): 60 dB
Capture Ratio: 3 dB
Image Rejection Ratio: 30 dB
Harmonic Distortion (1 kHz):
Mono; 0.5%/Stereo; 0.9%
Frequency Response:
30 Hz - 13 kHz (+0.5, -3 dB)
Stereo Separation (1 kHz): 35 dB
Signal-to-Noise Ratio:
Mono; 65 dB/Stereo; 62 dB
IF Rejection Ratio:60 dB min.
AM Tuner Section
Tuning Range:
520 kHz - 1,710 kHz (10-kHz steps)
(U.S.A./Canada/South America)
522 kHz - 1,611 kHz (9-kHz steps)
(General Export)
Usable Sensitivity: 60 dB/m
Selectivity: 20 dB +10 kHz
Signal-to-Noise Ratio: 40 dB
General
Power Requirements:
120 V AC, 60 Hz (U.S.A./Canada)
115/230 V AC, 50-60 Hz
(General Export/South America)
Dimensions (WxHxD):
435 x 132 x 333 (mm)
(17-1/8" x 5-3/16" x 13-1/8")
Weight (net): 6.8 kg (15 Ibs.)
Standard Accessories:
AM Loop Antenna x 1
FM “T" Type Antenna x 1
@ Improvements may result in specifications and
features changing without notice.
@ Photos and illustrations may differ slightly from
production models.
=12—