User’s Manual
22
3. Playback Process Bar
If you press INFO key, playback process bar is displayed. It displays current file information,
playback process and operation help information.
1. File name 2. Watching point time (hh:mm:ss)/
3. Playback process 4. Total time (hh:mm:ss)
5. Operation help information
4. Jump backward/forward
1. Press INFO key to display playback process bar.
2. Press Red/Blue keys to make a big jump backward/forward.
3. Press PLAY key to play from the specified time point.
5. Bookmark
You can mark favorite parts of a recorded file by creating bookmarks, and then jump to them.
You can have up to 20 bookmarks. Bookmarks are stored with the recorded file so that you can
use them again.
To make bookmarks, perform the following steps during playback:
v Add Bookmark
1. Press INFO key to display the process bar.
2. Press Green key to add a bookmark at a desired scene; then you will see a small triangle
appear on the progress bar as per the picture on the right.
v Go to Bookmark
1. Press INFO key to display the process bar.
2. Press Yellow key to jump to the next bookmark
on progress bar. The file will be played from the
bookmark.
v Delete Bookmark
1. Press INFO key to display the process bar.
2. Press Yellow key to jump to a bookmark.
3. Press Green key to delete it.
6. File Cut
You can cut sections such as commercial breaks from a recorded file. The cut section will be
skipped during playback. To cut the file, perform the following steps during playback:
1. Press INFO key to display playback progress bar.
2. Press OK key to enable the “File cut” keys (Green and Yellow).
3. Move to the starting point of the scene you want to cut by using VOL or VOL key.
To Next Page
Loading...