User’s Manual
30
8.4 Delete Channel
Note: A deleted channel cannot be accessed
unless you search for it again.
1. Press keys to select a channel.
2. Press key to pop up a drop-down list.
3. Highlight “Delete” and press OK key to mark this
channel with “ ”. If you want to cancel this set-
ting, press OK key again.
You can also delete all channels if “Delete All” is
selected.
After above setting, press EXIT key and a message box pops up for confirmation. Select
“OK“ and press OK key to confirm or select “EXIT” and press OK key to cancel the operation.
9. System Setting
9.1 Common Set
You can to configure the video and audio settings appropriately to your TV set and other ap-
pliances.
Select Main Menu ? Setting ? Common Set and press OK key to enter.
Menu Language: Press key to pop up a drop-down list. Press keys to select a
language for menu and press OK key to confirm.
Aspect Ratio: To view wide screen programs on a non-wide screen TV, set the option to
Letter Box or pan-scan. Wide-screen pictures then will be reduced to fit to the width of the
normal screen.
Resolution: The unit supports various video
resolutions: 1080P, 1080i, 720p or 576p. The
resolution of 720p, 1080P and 1080i are con-
sidered high definition. The higher resolution the
better quality you can enjoy. However, if your TV
set does not support high definition, you cannot
enjoy high definition quality picture. You can set
the option to the highest resolution your TV can
display. If you know your TV’s native screen
resolution, you may achieve a better picture by
setting it to that resolution. The unit will then
convert all video output to the selected setting.
Note: You can only view standard definition video with the composite video con-
nector (VIDEO).
Time Zone Set: Make sure that your local time is displayed correctly on this option, oth-
erwise, press key to pop up a drop-down list, then press keys to select the time
zone in which you live.
Close Caption: Set CC key function. Press key to pop up a drop-down list. Press
keys to select “On” or “Off”.
Daylight Saving Time: If daylight saving time is observed in your state at the moment, set
the option to “On”.
Note: Daylight saving time adds one hour to the time when the option is set to “On”.
To Next Page
Loading...
General