User’s Manual
20
5.4 Schedule Recording
You can set future programs to be recorded at a specific time, and the unit will start recording
automatically. In addition, you can modify schedules and delete unwanted schedules.
Note: The unit has 2 standby modes called “Passive” and “Active” - see 2.5 Active
Standby and Passive Standby for further details. In either mode, the unit will start re-
cording with both picture and sound. the unit will return to standby upon completion. If
the unit is on and you have started a recording you can only enter either standby mode
by stopping the recording.
Select Main Menu ? PVR ? Schedule and press OK key to enter, or press TIMER RECORD
key to enter directly in non-menu mode.
1. Add Schedule
1. If no schedule is stored, press OK key directly to display add schedule window. If some
schedules are stored, press OK key to pop up a drop-down list, select “Add” and press OK
key to display add schedule window.
2. Set schedule parameters as follows:
Schedule Type: Set schedule type to Rec with keys. The unit will record channel at
the specific time automatically.
Schedule Start Time: Press OK key to display
calendar window. You can select a specific date
using the arrow keys, then press the FAV key to
enter a starting time using the number keys. The
recording will be started at the specific time.
Press OK key to save and re-enter the schedule
window.
Schedule End Time: Press number keys to
input end time.
Schedule Mode: Press keys to select
Once (one time), Daily (every day) or Weekly
(one day every week). If “Weekly” is selected,
press OK key to display weekly window. You
can select desired days from Monday to Sunday
with keys and press OK key to confirm,
then select “OK” and press OK key to save.
Channel Name: Press OK key to display
channel list, from which you can press
keys to select your desired channel.
3. Move cursor to “OK” and press OK key to add schedule.
Note: You can schedule recording in EPG window directly. Refer to 4.2 Schedule Pro-
gram using EPG for detailed operations.
2. Modify Schedule
1. Press keys to select a schedule.
2. Press OK key to display a drop-down list.
3. Select “Modify” and press OK key to display modify schedule window. You can modify
schedule start time, end time and mode. Refer to 5.4.1 Add Schedule for detailed opera-
tions.
To Next Page
Loading...
General